MONOFORMAT semi-automatic case sealer fitted with side drive belts. Case height and width can be manually adjusted with cranks.
It tapes top and bottom.
The D15NC meets all the expected performances and versatility
for a self-adhesive tape sealing machine, for series of boxes of
uniform size.
Box size adjustment is simple and fast: height and width are set
by means of two cranks, and box guide rails by hand. All in less
than two minutes.
Once the carton dimensions are set, the machine is ready to
operate. Just by pushing the start button and the filled cartons
with folded lower flaps can be fed to the sealer. The operator-fed
boxes will then have upper and lower flaps automatically taped.
Both top and bottom taping heads are easily removable, without
tools, to enable an easy tape roll refill.
Standard Equipment
- 50 mm (2") taping heads.
- Box height and width set by 2 cranks
- Box guiding rails.
- Height adjustable legs.
- Upper structure supported by 2 strong masts.
- D15NC Standard: Transmission with 1 motor. Reduction through
pulleys.
- D15NC Top: Transmission through 2 motoreductors directly to
the pulleys of the arms.
Semiautomatic carton sealer for selfadhesive tape
FEATURES
The D25NC meets all the expected performances and versatility for a self-adhesive tape sealing machine, for boxes
of different sizes randomly mixed.
Box size adjustment is automatic; just pushing the start button, switch on compressed air inlet and the machine will
be ready to accept filled cartons with folded lower flaps.The operator-fed boxes will then have upper and lower flaps
automatically taped.
Both top and bottom taping heads are easily removable, without tools, to enable an easy tape roll refill.
Automatic top flaps closure of random carton size. Control system through a PLC, ensuring the automatic adjustment of case width and height.
The machine is equipped with a glue dispenser and carton centering to ensure carton automatic infeed and separation.
The fully automatic, self-adjusting top flap folding carton sealer,
model D45NC, meets all the possible performances and versatility
such a machine, using self-adhesive tape, should deliver.
Cases are fed from a filling line; the machine sorts them one by
one and adjusts automatically to their individual width and height.
Top flaps are automatically folded close and tape is applied both
on top and bottom, however it is required.
Outputs may reach up to 7 cases/min, depending on the diversity
of cases dimensions.
As a fully automatic system it may be fed from different production
lines. It is a flexible unit, which may be adapted to almost every
type of case.
STANDARD FEATURES
- 50 mm (2") taping heads.
- Automatic upper flaps pneumatic folder.
- Pneumatical width and height setting.
- Two motors for synchronized side belt drive.
- Upper flaps folding rails.
- Height adjustable legs.
- Inbuilt air filtering and lubricating system.
- Adjustable air pressure gauge
- Upper structure supported by 4 masts.
- Adjustable flap folding timing, both at activation and deactivation.
- Case dosing and indexing by conveyor belt.
